Gain LCD Display Real-time Line Repeater 20dBM Triband 2G 3G 4G LTE1800 WCDMA2100 LTE2600 Mobile Phone Signal Booster
Introduction
A mobile phone signal repeater provide the ultimate solution in any indoor area where cellular communications can not work well due to leak of signals (but outdoor signal good). The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones.
A mobile phone repeater is ideal for house, home, office use.
Specification | Uplink | Downlink | |
Frequency | DCS/LTE 1800MHz | 1705 - 1785MHz | 1805-1880MHz |
WCDMA 2100MHz | 1920-1980MHz | 2110-2170MHz | |
LTE2600Mhz | 2500-2570Mhz | 2620-2690Mhz | |
Operation Bandwidth | Wide Band | ||
Gain | ≥25dB | ≥25dB | |
Output Power | ≥0dBm | ≥20dBm | |
MGC (Manual Gain Control) | 31dB Range/1dB step | ||
Ripple in Band | 8dB | ||
Noise Figure | ≤ 6dB | ||
VSWR | ≤2.0 | ||
Automatic Level Control | 25dB | ||
Intermodulation Products | ≤ -40dBc | ||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm/30KHz | |
1GHz~12.75GHz | ≤ -30dBm/30KHz | ||
Frequency stability | ≤ 0.01ppm | ||
MTBF | > 50000 hours | ||
Time Delay | ≤1.5μs | ||
Impedance | 50Ω | ||
Power Supply | Input: AC 110~240V; Output: DC 9V/5A | ||
LED Alarm | Power LED | DC ON/OFF | |
Smart LED | Smart function ON/OFF | ||
AGC Alarm | Alarm RED when ALC 5dB-10dB | ||
ISO Alarm | Alarm RED when ALC 20dB-25dB, Then Repeater will Auto Shut Down. Auto restart after two minutes. | ||
Mechanical Specification | |||
RF Connector | N-Female | ||
Power Consumption | 25W | ||
Operating Temperature | -10â~ +55â | ||
Environment Conditions | IP40(Indoor) | ||
Installation Type | Wall Installation | ||
Dimensions (D x W x H ) | 224*170*65mm | ||
Weight | ≤ 4.5 KG |
The LCD Repeater covers all existing wireless public communications networks:
DCS/LTE 1800MHz, WCDMA 2100MHz,LTE2600Mhz
The LCD Repeaters have many intelligent functions: such as antenna isolation detection, Input & Output signal strength indication, system indication, manual gain control and smart mode. See the detailed introduction listed below:
The Display will auto off if don't touch it in one minute.
1. “GREETWIN”is Company LOGO.
2. Power: Power supply with indicator.
3. Smart: Smart function with indicator. AUTO Mode now.
4. M : “AUTO” switch to “MANU”.
5. Sel: Select the working systems ,
long press the button for 2s , will enter into 900M. then setting the gain.
then set the gain 65dB, long press the button for 2s again. 65dB was confirmed.
6. 900MHz: Show the current working system. Press “Sel” to change to the different system for operation.
7. AUTO/MANU: Automatic Mode or Manual gain Mode.
8. AGC: Automatic gain control with indicator.
9. ISO: Isolation inspection with indicator.
10. 63dB/68dB: Real-time gain show in the LCD display.
11. 0dBm/0dBm: Real-time outpower show in the LCD display.
12. UL is Uplink, DL is downlink. “+” is increasing the gain, “-” is decreasing the gain.
Q1. Could I get a sample before bulk order?
Yes, we offer the sample for all models but charged.
Q2. What should I do if I don't know about frequency in my country?
This model is suitable for Asia, Europe, The Middle East, and Brazil, etc.
*For more details please contact us directly.
Q3. Do you accept OEM/ODM order?
Yes, we can customize the brand logo, colors, and frequencies.
Q4.Payment Method
T/T, Western Union, Paypal, and Credit Card are available,
but we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please contact us with more details.
Q5.Shipment Date
Sample | 1-3 business days |
<50 pcs | 7-15 days |
50-100 pcs | 15-24 days |
>100 pcs | Negotiate |
Q6: Delivery Date of the sample by DHL/FedEx
Russia/Canada/Europe/Asia | 3-5 days |
Middle East/Latin American | 3-6 days |
African | 5-7 days |
Gain LCD Display Real-time Line Repeater 20dBM Triband 2G 3G 4G LTE1800 WCDMA2100 LTE2600 Mobile Phone Signal Booster
Introduction
A mobile phone signal repeater provide the ultimate solution in any indoor area where cellular communications can not work well due to leak of signals (but outdoor signal good). The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones.
A mobile phone repeater is ideal for house, home, office use.
Specification | Uplink | Downlink | |
Frequency | DCS/LTE 1800MHz | 1705 - 1785MHz | 1805-1880MHz |
WCDMA 2100MHz | 1920-1980MHz | 2110-2170MHz | |
LTE2600Mhz | 2500-2570Mhz | 2620-2690Mhz | |
Operation Bandwidth | Wide Band | ||
Gain | ≥25dB | ≥25dB | |
Output Power | ≥0dBm | ≥20dBm | |
MGC (Manual Gain Control) | 31dB Range/1dB step | ||
Ripple in Band | 8dB | ||
Noise Figure | ≤ 6dB | ||
VSWR | ≤2.0 | ||
Automatic Level Control | 25dB | ||
Intermodulation Products | ≤ -40dBc | ||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm/30KHz | |
1GHz~12.75GHz | ≤ -30dBm/30KHz | ||
Frequency stability | ≤ 0.01ppm | ||
MTBF | > 50000 hours | ||
Time Delay | ≤1.5μs | ||
Impedance | 50Ω | ||
Power Supply | Input: AC 110~240V; Output: DC 9V/5A | ||
LED Alarm | Power LED | DC ON/OFF | |
Smart LED | Smart function ON/OFF | ||
AGC Alarm | Alarm RED when ALC 5dB-10dB | ||
ISO Alarm | Alarm RED when ALC 20dB-25dB, Then Repeater will Auto Shut Down. Auto restart after two minutes. | ||
Mechanical Specification | |||
RF Connector | N-Female | ||
Power Consumption | 25W | ||
Operating Temperature | -10â~ +55â | ||
Environment Conditions | IP40(Indoor) | ||
Installation Type | Wall Installation | ||
Dimensions (D x W x H ) | 224*170*65mm | ||
Weight | ≤ 4.5 KG |
The LCD Repeater covers all existing wireless public communications networks:
DCS/LTE 1800MHz, WCDMA 2100MHz,LTE2600Mhz
The LCD Repeaters have many intelligent functions: such as antenna isolation detection, Input & Output signal strength indication, system indication, manual gain control and smart mode. See the detailed introduction listed below:
The Display will auto off if don't touch it in one minute.
1. “GREETWIN”is Company LOGO.
2. Power: Power supply with indicator.
3. Smart: Smart function with indicator. AUTO Mode now.
4. M : “AUTO” switch to “MANU”.
5. Sel: Select the working systems ,
long press the button for 2s , will enter into 900M. then setting the gain.
then set the gain 65dB, long press the button for 2s again. 65dB was confirmed.
6. 900MHz: Show the current working system. Press “Sel” to change to the different system for operation.
7. AUTO/MANU: Automatic Mode or Manual gain Mode.
8. AGC: Automatic gain control with indicator.
9. ISO: Isolation inspection with indicator.
10. 63dB/68dB: Real-time gain show in the LCD display.
11. 0dBm/0dBm: Real-time outpower show in the LCD display.
12. UL is Uplink, DL is downlink. “+” is increasing the gain, “-” is decreasing the gain.
Q1. Could I get a sample before bulk order?
Yes, we offer the sample for all models but charged.
Q2. What should I do if I don't know about frequency in my country?
This model is suitable for Asia, Europe, The Middle East, and Brazil, etc.
*For more details please contact us directly.
Q3. Do you accept OEM/ODM order?
Yes, we can customize the brand logo, colors, and frequencies.
Q4.Payment Method
T/T, Western Union, Paypal, and Credit Card are available,
but we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please contact us with more details.
Q5.Shipment Date
Sample | 1-3 business days |
<50 pcs | 7-15 days |
50-100 pcs | 15-24 days |
>100 pcs | Negotiate |
Q6: Delivery Date of the sample by DHL/FedEx
Russia/Canada/Europe/Asia | 3-5 days |
Middle East/Latin American | 3-6 days |
African | 5-7 days |