Tri Band Repeater Mobile GSM DCS Repeater WCDMA with 4 Ways Splitter

Tri Band Repeater Mobile GSM DCS Repeater WCDMA with 4 Ways Splitter

4 Ways Splitter Description:

Power splitter is a kind of all output signal energy will be divided into two or more signals energy output devices.

Power splitters/dividers are used in a wide variety of applications and can satisfy almost any requirement where a signal needs to be distributed or combined. Our compact, microstrip splitter/divider/combiners provide minimal insertion loss while delivering high isolation between output ports with exceptional phase and amplitude balance.

Booster for cell phone is an active amplifier based on an advanced power amplification technology.

GW-27GDW is highly effective for poor signal areas such as big buildings, parking lots, tunnels etc.

It amplifies the signal within 5000 m2. It picks up even the lowest signal from the base station.

Cost effective solution for weak signal zones, reduce drop/off calls.Support 2G/3G systems,

The repeater improves mobile signals with no negative impact on human health.

Eliminate dropped calls and increase data speeds with a signal booster.

Indoor Tri Band Signal Repeater (Cell Phone Signal Booster) series is an ideal solution for three wireless systems in small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.

4 Ways Splitter Features:

1. Cost effective solution for weak signal zones, reduce drop/off calls.

2. Compact size, low power consumption,

3. easy installation, great cover.

4. Expansion and extending of the signal of base station.

5. Optimization of the quality of the signal and source

6. Cover about 1000~5000m² without block or obstruct.

7. High linear design, ALC function design, low interference to BTS.

8. Support any cellular devices (voice & data & video)

9. Wide band signal booster, or customize selective band booster.

10. Support three wireless systems

11. Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)

4 Ways Splitter Advantages:

Digital Display Panel, Intelligent mode setting
Smart function called which can be activated via the digital display panel.
Users can choose gain and working system by LED Digital Panel.

Set the technical parameters simple and efficient, this is easier than DIP Switch.

Standard Package:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS

Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)

4 Ways Splitter Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.

Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.

Model:

GW-10GDW, 10dBm

GW-15GDW, 15dBm

GW-20GDW, 20dBm

GW-23GDW, 23dBm

GW-27GDW, 27dBm

GW-30GDW, 30dBm

Support frequency range:

Application Diagram: