You are here: Home » Products » Cell Phone Signal Boosters » 2G 3G 4G Network Mobile Repeater EGSM900MHz DCS1800MHz WCDMA2100MHz Tri Band Manufature Booster /Amplifier

Product Category

PRODUCT DETAIL

Share to:

2G 3G 4G Network Mobile Repeater EGSM900MHz DCS1800MHz WCDMA2100MHz Tri Band Manufature Booster /Amplifier

Quantity:
  • Guangdong,China
  • Greetwin
  • SGS, ISO9001,CE,ROHS
  • GW-25GDW
  • 1
  • $302.1-$356.3/ PC
  • carton package
  • 3-5 days
  • L/C, D/A, D/P, T/T, Western Union, MoneyGram, Western Union
  • 1000

1,Product Details.jpg

2G 3G 4G Network Mobile Repeater EGSM900MHz DCS1800MHz WCDMA2100MHz Tri Band Manufature Booster /Amplifier

Frequency Range

Uplink

Downlink

EGSM900MHz+DCS1800MHz+WCDMA2100MHz

880-915MHz/1710-1785MHz/1920-1980MHz

925-960MHz/1805-1880MHz/

Max. Gain

73dB+2dB

78dB+2dB

Max. Output Power

20dBm+2dBm

25dBm+2dBm

Band width

Wide Band

Manual Gain Control

31dB / 1dB Step

ALC

>20dB

Ripple in Band

8dB

Noise Figure

≤ 6dB

VSWR

≤ 2.0

Intermodulation

≤ -40dBc

Spurious Emission

9KHz~1GHz

≤ -36dBm

 

1~12.75GHz

≤ -30dBm

Time Delay

≤ 1.5 μs

Frequency stability

≤ 0.01ppm

MTBF

> 50000 hours

Impedance

50 ohm

Power Supply

AC 90-264V,DC 10V/10A

Power LED

Power indicator

Alarm LED

Red

Self oscillation or Strong input signal

 

Green

Normal

Mechanical Specification

RF Connector

N-Female

Switch

Power Switch

Cooling

Heatsink Convection cooling

Humidity

< 90%

Operating Temperature

-10°C ~ +55°C

Environment Conditions

IP40

Installation Type

Wall Installation

Size

268mm*439mm*58mm

Weight

< 9.5Kg


2,Product Display.jpg

 

 

 

 

2G 3G 4G Network Mobile Repeater EGSM900MHz DCS1800MHz WCDMA2100MHz Tri Band Manufature Booster /Amplifier 22G 3G 4G Network Mobile Repeater EGSM900MHz DCS1800MHz WCDMA2100MHz Tri Band Manufature Booster /Amplifier 32G 3G 4G Network Mobile Repeater EGSM900MHz DCS1800MHz WCDMA2100MHz Tri Band Manufature Booster /Amplifier 4

Cell Phone Signal Repeater Manual

Indoor Quad Band Signal Repeater (Signal Booster) series is an ideal solution for four wireless system in small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.

The signal booster improves mobile signals with no negative impact on human health.

 

Cell Phone Signal Repeater Features

1. Cost effective solution for weak signal zones, reduce drop/off calls.

2. Compact size, low power consumption, easy installation, great cover.

Expansion and extending of the signal of base station.

Optimization of the quality of the signal and source

3. Cover about 500~3000m² without block or obstruct.

4. High linear design, ALC function design, low interference to BTS.

5. Support any cellular devices (voice & data & video)

6. Wide band signal booster, or customize selective band booster.

 

Cell Phone Signal Repeater Advantages

Digital Display Panel, Intelligent mode setting

Smart function called which can be activated via the digital display panel.

Users can choose gain and working system by LCD Digital Panel.

Set the technical parameters simple and efficient, this is easier than DIP Switch.

 

Standard Package

1) AC90-264V, DC10V/10A power supply adapter 1PCS

2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS

3) Installation kit 1PCS

4) User manual 1PCS

 

Recommended Accessories
1)Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)

 

Cell Phone Signal Repeater Application Diagram

To expand signal coverage or fill signal blind area where signal is weak or unavailable.

Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.

640 (107)__

3,user's manual.jpg

 

Product Recommended

4,Product Recommended.jpg

Company Information

5,Company Information.jpg

 

 

6,Exhibition and customers.jpg 

7,Certifications.jpg 

2G 3G 4G Network Mobile Repeater EGSM900MHz DCS1800MHz WCDMA2100MHz Tri Band Manufature Booster /Amplifier 11 

9,FAQ.jpg

      Q1. Why is there still no signal after installing the equipment?

            1. Check the power on booster and power supply.

            2. Check the connector of outdoor antenna is tight or not.

            3. Check the connectors of RF cable are tight or not.

            4. Check the outdoor signal is strong enough or not.

            5. Check to make sure the antenna is installed correctly.

            6. Check the connector of indoor antenna is tight or not.

            7. Check the cable type is suitable or not.

 

      Q2. Why the signal strength is too weak on the edge of area?

            1. Check the outdoor signal and antenna direction.

            2. Check booster is full gain or not.

            3. Check all of the connectors are tight.

            4. Change the location of outdoor/indoor antenna.

            5. Check the cable type is suitable or not.

            6. Deploy more indoor antennas.

 

      Q3. After running booster, why the signals are not stable?

            1. Checking the distance between donor antenna and server antenna are too close to each other? Check LED

                of booster to

                make sure alarms are green.

            2. Checking the signals from donor antenna whether to be stable or not?

            3. Connect the system again if it is incorrect connection.

 

      Q4. Why the booster power LED is not bright?

            1. Checking the input AC power range indicated on power adapter whether is corresponding to the local

                power system.

            2. Checking the power adapter whether connect the equipment correctly and stably or not.

            3. Checking the power adapter whether damage or not. To test output voltage whether be corresponding to

                that indicated on power adapter or not by multimeter

 
Previous: 
Next: 

Home

Add:  Floor 5, Building A, Baodeli, No. 338, Huanguan Middle Road, Songyuanxia Community, Guanhu Street, Longhua District, Shenzhen City, Guangdong Province, China   Tel: +86-15112267605
Copyright  2022 Shenzhen Greetwin Technology Co., Limited. All rights reserved. Technology by Leadong. Sitemap