You are here: Home » Products » Mobile Signal Repeater » 40dBm Mobile Signal Repeater GSM 900 Signal Booster for Wireless Network

Related Products

PRODUCT DETAIL

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

40dBm Mobile Signal Repeater GSM 900 Signal Booster for Wireless Network

Quantity:
  • China

  • GREETWIN

  • SGS, ISO9001,CE,ROHS

  • GW-40G

  • 1pcs

  • Negotiable

  • Carton with PE Foam

  • 3 Working Days After Received Payment

  • T/T, L/C, Western Union, MoneyGram

  • 5000pcs per Month

40dBm Mobile Signal Repeater GSM 900 Signal Booster for Wireless Network

 


The 10W Mobile Signal Repeater is the kind of repeater used most frequently. It has a simple structure to transparently convey and amplify the wireless signal (at the same frequency) between the BTS (Base Transceiver Station) and mobiles in Dual wireless network.
The 40dBm Mobile Signal Repeater is working as a relay between the BTS and mobiles. It picks up the signal from the BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna (or the Indoor Signal Distribution System) to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
 
Model:
33dBm, GW-33G
37dBm, GW-37G
40dBm, GW-40G
43dBm, GW-43G
 
Features:
* Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corroding;
* Highly selective channel selector can process multiple channels simultaneously;
* No interference to BTS by adopting linear amplifier with high gain and low noise;
* Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink;
* (Optional)USB port provides a link to a notebook for local supervision or to the built-in wireless modem to communicate with the NMS (Network Management System) that can remotely supervise repeater's working status and download operational parameters to the repeater.

The RF Repeater is mainly applicable to such case:
* The repeater can find an installation place which can receive pure BTS signal at strong enough level and can meet the requirement of isolation to avoid self-oscillation;
* And the distance between the BTS and the area to be covered is 2km around.

In comparison with FSR (frequency shift repeater) and FOR (fiber optic repeater), the RF Repeater has the following benefits and disadvantages:
Pro:
Easy to build the installation site;
Lower cost of equipment and site-building.

Disadvantages:
* Inappropriate installation may cause self-oscillation;
* The Coverage Antenna shall face against the Donor Antenna, which limits the coverage angle;
* High signal noise may be introduced since the Donor Antenna picks up signal from the air;
* The repeater shall be installed within the coverage of BTS.

Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, etc
Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, highways

 

Specifications:

 

  GSM 900
Working Frequency (customizable) Uplink (MHz) 890- 915MHz
Downlink (MHz) 935- 960MHz
Working Bandwidth 25 MHz
Max. Input Level (Non-Destructive) -10dBm
Max. Output Power (customizable) 40dBm
Max. Gain ≥ 95dB
Gain Adjustment Range 1~31 dB @ step of 1dB
Voltage Standing Wave Ratio (VSWR) < 1.5
Spurious Emission Within working band ≤ -15dBm/30kHz
Out of working band
(Δf > 2.5MHz)
9kHz~1GHz: ≤ -36dBm/30kHz
1GHz~12.75GHz: ≤ -30dBm/30kHz
Noise Figure ≤ 5dB
In-Band Ripple ≤ 3dB
Third-Order Intermodulation ≤ -45dBc/30kHz (measured under rated output power)
System Delay ≤ 5.0μSec
I/O Impedance 50Ω
RF Connector N-Type (Female) / changeable / bottom of casing
Temperature Range Operation: -25°C ~ +55°C / Storage: -30°C ~ +60°C
Relative Humidity Range ≤ 95% (non condensing)
Power Supply (customizable) AC 220V, 50/60Hz / AC 110V, 50/60Hz
Power Consumption ≤ 200W
Backup Power Supply (optional) 4 hours
Casing Level IP65
Dimensions 550mm X 440mm X 235mm
Weight 40kg
NMS Monitoring Function (optional) Real-time alarm for door status, temperature, power supply, LNA, VSWR, self-oscillation, etc. Remote control such as turn on/off, increasing/decreasing output power, etc. Real-time status for output/input power, UL/DL gain, all status of repeater etc.

 

Support these systems:

 

Frequency Range Uplink Downlink
CDMA 450 452.5 - 457.5MHz 462.5 - 467.5MHz
LTE700 A/B 699- 716MHz 729- 746MHz
LTE700 C 777- 787MHz 746- 756MHz
LTE700 D 788- 798MHz 758- 768MHz
LTE 800 832- 862MHz 791- 821MHz
iDEN 806- 824MHz 851- 869MHz
CDMA 800/GSM 850 824- 849MHz 869- 894MHz
GSM 900 890- 915MHz 935- 960MHz
EGSM 880 - 915MHz 925 - 960MHz
AWS1700 1710- 1755MHz 2110- 2155MHz
DCS 1800 1710- 1785MHz 1805- 1880MHz
PCS 1900 1850- 1910MHz 1930- 1990MHz
WCDMA/3G 2100 1920- 1980MHz 2110- 2170MHz
LTE 2600 2500- 2570MHz

2620- 2690MHz

 

Application Diagram:

 

Indoor Coverage:

40dBm Mobile Signal Repeater GSM 900 Signal Booster for Wireless Network 0

Previous: 
Next: 
FEEDBACK
Home
Add:  Baodeli industrial park, Longhua District, Shenzhen City, Guangdong Province, China   Tel: +86-15112267605
Copyright  2022 Shenzhen Greetwin Technology Co., Limited. All rights reserved. Technology by Leadong. Sitemap