You are here: Home » Support » FAQ » Products

FAQ Category

 Tel : +86-15112267605
 Whatsapp : +86-15112267605
 E-mail info@greetwin.com
 Add : Room 506, Floor 5, Building A, Baodeli, No. 338, Huanguan Middle Road, Songyuanxia Community, Guanhu Street, Longhua District, Shenzhen City, Guangdong Province, China

Products

  • Why the booster power LED is not bright?

    1. Checking the input AC power range indicated on the power adapter whether is corresponding to the local power system.
    2. Checking the power adapter whether connect the equipment correctly and stably or not.
  • After running the booster, why the signals are not stable?

    1. Checking the distance between the donor antenna and server antenna is too close to each other? Check LED of the booster to make sure alarms are green.
    2. Checking the signals from the donor antenna whether to be stable or not?
    3. Connect the system again if it is an incorrect connection.
  • Why the signal strength is too weak on the edge of the area?

    1. Check the outdoor signal and antenna direction.
    2. Check booster is the full gain or not.
    3. Check all of the connectors are tight.
    4. Change the location of the outdoor/indoor antenna.
    5. Check the cable type is suitable or not.
    6. Deploy more indoor antennas.
  • Why is there still no signal after installing the equipment?

    1. Check the power on the booster and power supply.
    2. Check the connector of the outdoor antenna is tight or not.
    3. Check the connectors of the RF cable are tight or not.
    4. Check the outdoor signal is strong enough or not.
    5. Check to make sure the antenna is installed correctly.
    6. Check the connector of the indoor antenna is tight or not.
    7. Check the cable type is suitable or not.
Home
Add:  Baodeli industrial park, Longhua District, Shenzhen City, Guangdong Province, China   Tel: +86-15112267605
Copyright  2022 Shenzhen Greetwin Technology Co., Limited. All rights reserved. Technology by Leadong. Sitemap