 |
| Quantity: | |
|---|---|
GW-43DRLG
Greetwin
To Be Negotiated
Neutral Packing
15 Working Days After Received Payment
L/C, D/A, D/P, T/T, Western Union, MoneyGram
2000PCS
Shenzhen
GREETWIN
CE, RoHSSGS, ISO9001
1 PC
Product Description
Model: GW-43DRLG
The Digital Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage and communication quality in mobile communication system. And its easy installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and mobiles. It receives the low-power signal from BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
Features:
Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corrosion
DSP Module supporting up to 3 sub-bands adjustable in each frequency band
Low interference to BTS by adopting linear amplifier with high gain and low noise
Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink
USB port provides a link to a notebook for local supervision or IP Based NMS (Network Management System) that can remotely supervise repeater's working status and download operational parameters to the repeater via Ethernet.
Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
| Outdoor: | Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, … |
| Indoor: | Hotels, exhibition centers, basements, shopping malls, offices, parking lots, … |
Application Diagram:
Technical Specifications
| Item | Specifications | ||
| System | LTE800 | GSM900 | |
| Frequency Range | Uplink | 832~862MHz | 880~915MHz |
| Downlink | 791~821MHz | 925~960MHz | |
| Bandwidth(Digital Filter) | 3 Sub-Bands, 0.2-30MHz Variable per Sub-Band | 3 Sub-Bands, 0.2-30MHz Variable per Sub-Band | |
| Maximum Output Power | Uplink | 27±2dBm | 27±2dBm |
| Downlink | 43±2dBm | 43±2dBm | |
| Maximum Gain | 95±3dB | ||
| Gain Adjustment Range | 0~30dB/1dB(The Gain of Each Sub-band can be Adjusted Separately) | ||
| AGC | ≥20dB | ||
| In-Band Ripple(Typical) | ≤ ±3dB | ||
| VSWR | ≤ 1.8 | ||
| Noise Figure | ≤ 8dB | ||
| Maximum Input Power(Non-Destructive) | -10dBm | ||
| Spurious Emission | 9kHz~1GHz: ≤ -36dBm | ||
| 1GHz~12.75GHz: ≤ -30dBm | |||
| System Delay | ≤ 8μs | ||
| I/O Impedance | 50Ω | ||
| RF Connector | 2xN-Female | ||
| Power Supply | AC220V, 50/60Hz | ||
| Temperature Range | Operation: -25°C ~ + 55°C | ||
| Application | Indoor or Outdoor(IP65) | ||
| Relative Humidity Range | ≤ 95% (Non Condensing) | ||
| Mounting | Wall Mounting | ||
| Dimensions | 500x440x187mm | ||
| Weight | ≤35kg | ||
| Local Control | Via USB Interface and WiFi Hotspot | ||
| Remote Mode(Optional) | SMS and Could NMS via 4G Wireless Modem | ||
Product Description
Model: GW-43DRLG
The Digital Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage and communication quality in mobile communication system. And its easy installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and mobiles. It receives the low-power signal from BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
Features:
Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corrosion
DSP Module supporting up to 3 sub-bands adjustable in each frequency band
Low interference to BTS by adopting linear amplifier with high gain and low noise
Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink
USB port provides a link to a notebook for local supervision or IP Based NMS (Network Management System) that can remotely supervise repeater's working status and download operational parameters to the repeater via Ethernet.
Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
| Outdoor: | Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, … |
| Indoor: | Hotels, exhibition centers, basements, shopping malls, offices, parking lots, … |
Application Diagram:
Technical Specifications
| Item | Specifications | ||
| System | LTE800 | GSM900 | |
| Frequency Range | Uplink | 832~862MHz | 880~915MHz |
| Downlink | 791~821MHz | 925~960MHz | |
| Bandwidth(Digital Filter) | 3 Sub-Bands, 0.2-30MHz Variable per Sub-Band | 3 Sub-Bands, 0.2-30MHz Variable per Sub-Band | |
| Maximum Output Power | Uplink | 27±2dBm | 27±2dBm |
| Downlink | 43±2dBm | 43±2dBm | |
| Maximum Gain | 95±3dB | ||
| Gain Adjustment Range | 0~30dB/1dB(The Gain of Each Sub-band can be Adjusted Separately) | ||
| AGC | ≥20dB | ||
| In-Band Ripple(Typical) | ≤ ±3dB | ||
| VSWR | ≤ 1.8 | ||
| Noise Figure | ≤ 8dB | ||
| Maximum Input Power(Non-Destructive) | -10dBm | ||
| Spurious Emission | 9kHz~1GHz: ≤ -36dBm | ||
| 1GHz~12.75GHz: ≤ -30dBm | |||
| System Delay | ≤ 8μs | ||
| I/O Impedance | 50Ω | ||
| RF Connector | 2xN-Female | ||
| Power Supply | AC220V, 50/60Hz | ||
| Temperature Range | Operation: -25°C ~ + 55°C | ||
| Application | Indoor or Outdoor(IP65) | ||
| Relative Humidity Range | ≤ 95% (Non Condensing) | ||
| Mounting | Wall Mounting | ||
| Dimensions | 500x440x187mm | ||
| Weight | ≤35kg | ||
| Local Control | Via USB Interface and WiFi Hotspot | ||
| Remote Mode(Optional) | SMS and Could NMS via 4G Wireless Modem | ||
