20dBm EGSM 900MHz Variable Repeater / Phone Signal Enhancer Indoor Wall Mount
With Digital LED display
Signal Enhancer Description:
EGSM 900MHz Variable Bandwidth Repeater enable to amplify only the targeted operator’s signals and reject all the others effectively, it is, therefore, an optimal solution for the people who want to select the certain signal among different operators.
20dBm Single Band Variable Band Repeater allow small to medium size indoor areas have reliable radio communications for first responders. Automatic gain control allows stable output power even when the handheld is close to the repeater, which protects the donor site from interruption. The unit is housed by a compact and light alumina casting enclosure.
The built-in external LCD accessible from the bottom of the enclosure allow the uplink and down link gains, Output Powers, Alarms and so on be configured and optimized easily on site without additional tool. Signal strength indicator helps find donor signal source and set up the system in the field without additional equipment.
Signal Enhancer Features:
1. Uplink/downlink frequency can be adjusted.
2. Built-in Saw filter provides high out of band rejection
3. Built-in switches and signal strength indicator allow find donor signal source and set up the system on site without additional equipment
4. External 100-240VAC universal power supply
5. Indoor wall mount
6. Heatsink convection cooling and low power consumption
7. Built-in ALC provides stable output power even when the handheld is close to the repeater to minimize the interference to the donor site
Parts Check List
Please make sure the following items are included in the box delivered to you. If any item is missing, contact your sales representative.
Table.1 Parts check list
| Item | Quantity |
| The Repeater, | 1 |
| External Power Adaptor | 1 |
| M6x40mm Screw with wallboard anchor | 4 |
| Customer Manual* | 1 |
* Factory may choose to ship the product along with a hardcopy of this manual, or make it available electronically through website download or email.
Signal Enhancer Data Sheet
| Items | Uplink | Downlink | |
| Frequency Range | 880~915MHz | 925~960MHz | |
| Variable Bandwidth | 1-25MHz | 1-25MHz | |
| Frequency Adjustment Step | 200KHz | 200KHz | |
| Output Power | 17±2dBm | 20±2dBm | |
| Gain | 65±3dB | 70±3dB | |
| Ripple | ≤6dB | ≤6dB | |
| VSWR | ≤2 | ≤2 | |
| Max. Input Power Without Damage | -10dBm | -10dBm | |
| ATT step of 1dB | 1 ~ 10dB | â£â⊃3;â£≤1dB | â£â⊃3;â£≤1dB |
| 10 ~ 20dB | â£â⊃3;â£≤1dB | â£â⊃3;â£≤1dB | |
| 20 ~ 25dB | â£â⊃3;â£≤1.5dB | â£â⊃3;â£≤1.5dB | |
| ALC Active 10dB | â£â⊃3;â£≤2dB | â£â⊃3;â£≤2dB | |
| Out of Band Gain | ±5MHz | ≤ 30dB | ≤ 35dB |
| Intermodulation Products | ≤ -40dBc | ≤ -40dBc | |
| Spurious Emission | 9KHz~1GHz | ≤ -30dBm | ≤ -30dBm |
| 1GHz~12.75GHz | ≤ -30dBm | ≤ -30dBm | |
| Noise Figure @ max. gain | ≤ 8dB | ≤ 8dB | |
| Time Delay | ≤ 5μs | ≤ 5μs | |
| Alarm | ALC not Active | Blue | Blue |
| ALC Active 5-10dB | Orange | Orange | |
| ALC Active 15-20dB | Red | Red | |
| broken | No Light | ||
| self-excitation | Red flashes | ||
| Run | normal | Blue | |
| self-excitation | Red | ||
| Power Supply | AC100V ~ 240V to 5V 3A | ||
| Power Consumption | ≤8W | ||
| Dimensions | 268mmx155mmx60mm | ||
| Weight | 2kg | ||
| RF Connector | N-Female | ||
| Environment Conditions | IP40 | ||
| Humidity | < 90% | ||
| Operating Temperature | -10â~+55â | ||