4 Band Cell Phone Signal Boosters 23dBm LTE 800 GSM 900 DCS 1800 WCDMA

4 Band Cell Phone Signal Boosters 23dBm LTE 800 GSM 900 DCS 1800 WCDMA

Signal Booster Description:

Indoor coverage for small area is mainly to solve the problem of weak signal and no signal. The tele-traffic is not a major contradiction. Use the low-power indoor wide band repeater and the antenna distribution system to cover. Suitable for the house, basement, small office, café etc.

The signal strength from outdoor antenna directly affects the efficiency of the indoor coverage. It's important to choose the location of the outdoor antenna. Normally is designed to be installed on the roof for optimum performance. Such as put in the attic or outside the window etc.

In order to avoid signal oscillation on the repeater, there needs to be certain distance between outdoor antenna and indoor antenna, such as vertical distance for 10meters or a concrete wall as an obstacle between them.

This 4 Band repeater have digital display panel, user can Select the different systems when you need, (only for Dual band, Tri band, Quad-band or Five band repeater.) it is smart design.

Indoor Quad Band Signal Repeater (Cell Phone Signal Booster) series is an ideal solution for three wireless systems in small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.

The repeater improves mobile signals with no negative impact on human health.

Eliminate dropped calls and increase data speeds with a signal booster.

Support these systems:

Model:

GW-10LGDW, 10dBm

GW-15LGDW, 15dBm

GW-20LGDW, 20dBm

GW-23LGDW, 23dBm

GW-27LGDW, 27dBm

GW-30LGDW, 30dBm

Signal Booster Features:

1. Cost effective solution for weak signal zones, reduce drop/off calls.

2. Compact size, low power consumption,

3. easy installation, great cover.

4. Expansion and extending of the signal of base station.

5. Optimization of the quality of the signal and source

6. Cover about 500~3000m⊃2; without block or obstruct.

7. High linear design, ALC function design, low interference to BTS.

8. Support any cellular devices (voice & data & video)

9. Wide band signal booster, or customize selective band booster.

10. Support three wireless systems

11. Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)

Signal Booster Advantages:

Digital Display Panel, Intelligent mode setting
Smart function called which can be activated via the digital display panel.
Users can choose gain and working system by LED Digital Panel.

Set the technical parameters simple and efficient, this is easier than DIP Switch.

Standard Package:
1) AC90-264V, DC power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS

Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)

Signal Booster Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.

Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.

Signal Booster Specification:

Signal Booster Application Diagram: