|Place of Origin:||China|
|Minimum Order Quantity:||1pcs|
|Packaging Details:||Carton with PE Foam|
|Delivery Time:||3 Working Days After Received Payment|
|Payment Terms:||T/T, L/C, Western Union, MoneyGram|
|Supply Ability:||5000pcs per Month|
|Product Name::||Indoor GSM Repeater 900MHz||Application::||Home, Office|
|Working Time::||Uninterrupted||Operating Temp::||-20℃ To +55℃|
|Output Power:||23dBm||HS CODE:||8543709200|
|Other Name:||Single Band Booster For Basement|
cell signal amplifier,
mobile phone signal blocker
Indoor GSM Repeater Mobile Phone Range Extender Single Band Booster
How it works?
The system includes inside antenna, outside antenna, all connection cables and the booster unit. The outside antenna receives cellular signal from the tower and sends it to the booster unit which then amplifies this signal and sends it into the building via the inside antenna. The inside antenna receives cellular signal from the phone or cellular device and sends it to the booster unit which then amplifies the signal and sends it back to the cellular tower via the outside antenna.
Eliminate dropped calls and increase data speeds with a signal booster.
Indoor Cell Phone Signal Booster series is an ideal solution for wireless system in small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.
The repeater improves mobile signals with no negative impact on human health.
Support these frequencies:
|CDMA 450||452.5 - 457.5MHz||462.5 - 467.5MHz|
|LTE700 A/B||699- 716MHz||729- 746MHz|
|LTE700 C||777- 787MHz||746- 756MHz|
|LTE700 D||788- 798MHz||758- 768MHz|
|LTE 800||832- 862MHz||791- 821MHz|
|iDEN||806- 824MHz||851- 869MHz|
|CDMA 800/GSM 850||824- 849MHz||869- 894MHz|
|GSM 900||890- 915MHz||935- 960MHz|
|EGSM||880 - 915MHz||925 - 960MHz|
|AWS1700||1710- 1755MHz||2110- 2155MHz|
|DCS 1800||1710- 1785MHz||1805- 1880MHz|
|PCS 1900||1850- 1910MHz||1930- 1990MHz|
|WCDMA/3G 2100||1920- 1980MHz||2110- 2170MHz|
|LTE 2600||2500- 2570MHz||2620- 2690MHz|
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption,
3. easy installation, great cover.
4. Expansion and extending of the signal of base station.
5. Optimization of the quality of the signal and source
6. Cover about 500~3000m² without block or obstruct.
7. High linear design, ALC function design, low interference to BTS.
8. Support any cellular devices (voice & data & video)
9. Wide band signal booster, or customize selective band booster.
10. can customize other system CDMA450, LTE700, LTE800, iDEN, CDMA800/GSM850,
GSM900, EGSM, AWS1700, DCS1800, PCS1900,WCDMA, LTE2600,etc
1. can customize the Cover Image on the Cell Phone Signal Booster, design private styles
2. If there are strong input signal or severe self oscillation, ISO LED is red.
3. If there are good input signal, AGC LED is green.
1) AC90-264V, DC9V/3A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
1)Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.
|GSM900||890 - 915MHz||935 - 960MHz|
|Max. Output Power||17dBm||23dBm|
|Band width||Wide Band|
|Manual Gain Control||31dB / 1dB Step|
|Automatic Gain Control||>30dB|
|Ripple in Band||CDMA,GSM≤6dB; DCS,PCS≤8dB；|
|Noise Figure||≤ 6dB|
|Intermodulation Products||9KHz~1GHz||≤ -36dBm|
|Spurious Emission||9KHz~1GHz||≤ -36dBm|
|Time Delay||≤ 1.5 μs|
|Frequency stability||≤ 0.01ppm|
|MTBF||> 50000 hours|
|Power Supply||AC 90-264V,DC 9V/3A|
|Power LED||Power indicator|
|ISO(Alarm LED)||Red||Self oscillation or Strong input signal|
|Cooling||Heatsink Convection cooling|
|Operating Temperature||-20°C ~ +55°C|
|Installation Type||Wall Installation|
When do you adjust the Dip Switches?
Your booster is also equipped with an alarm feature that monitors the input gain. If the input gain is too high, the Alarm LED will change color from green to red indicating the intensity. High input gain can occur if the donor antenna is in a location where the receive signal strength from the cell tower is extremely good (-50dBm or better) or if signal oscillation is taking place. Signal Oscillation is when the amplified signal from the indoor service antenna is feeding back to the donor antenna outside.
To determine what is the cause of your Alarm LED changing color you can disconnect the indoor antenna / service line from the Indoor port of the booster. If the LED does not change to green, then your input signal from the cell tower is very strong and it is highly recommended to attenuate the DL DIP Switches by 4dB, 8dB or 16dB till the LED’s turns green again. Then you must match the same attenuation value to the UL, after which you can connect the indoor antenna / service line again.