100W Digital Adjustable Frequency High Power Portable Dds Jammer Module
Description:
1: This module with Built-in DDS signal source and PA power amplifier integration.
2: The frequency can be customized according to your requirements. The low frequency is 800-1200 MHz, 1200-1500 MHz, can set 4 sub-band by software. For example, 800-900MHz, can choose 4 sub-band randomly.
3: The monitoring software can control hundreds of modules at the same time.
4: The module comes with LCD screen (optional), which can display parameters.
such as frequency, switching status, output power, etc.
5: The software can modify all parameters, address codes, etc., which is suitable for matching the module and antenna on the full machine.
6: Comes with RS485 communication function, can carry out a multi-band network mode, LCD screen will show the detailed specs of full machine. Including each sub-band frequency, output power, current, voltage, temperature and other parameters.
7: With complete control software, can set the frequency point of each sub-band, adjust the output power, switch, etc., get all module data automatically, no need to add modules manually.
| Technical Parameter | |||
| Power amplifier | Frequency Range (MHz) | 800-1200MHz | |
| Frequency Range (MHz) | 1200-1500 MHz | ||
| Frequency Range (MHz) | 1500-1800 MHz | ||
| Frequency Range (MHz) | 1800-2200 MHz | ||
| Frequency Range (MHz) | 2200-2500 MHz | ||
| Frequency Range (MHz) | 2500-2800 MHz | ||
| Frequency Range (MHz) | 2800-3100 MHz | ||
| Frequency Range (MHz) | 3100-3300 MHz | ||
| Frequency Range (MHz) | 3300-3600 MHz | ||
| Frequency Range (MHz) | 3600-4000 MHzTest ItemsPower amplifier
| ||
| Frequency Range (MHz) | 4000-4500 MHz | ||
| Frequency Range (MHz) | 4500-5000 MHz | ||
| Frequency Range (MHz) | 5000-5500 MHz | ||
| Output Power(dBm) | 50±1dBm | ||
| Time Delay | < 1us | ||
| Gain(dB) | 50±1.0 | ||
| Ripple in Band(dB) | ≤2 | ||
| Input VSWR | ≤1.5 | ||
| Output VSWR | ≤1.5 | ||
| Power Supply | +28 Vdc@50W/6.5A(According to frequency) | ||
| RF Connector | N-50KFD | ||
| Operating Temperature | -20~+80ºC | ||
| Dimension(mm)(Length x Width x Height) | 175mm×164mm×60mm | ||
| Input Signal Source | Built-in DDS Signal Source | ||
| Mode of Communication | RS485 | ||
| Cooling | Built-in radiator and fan, can work independently | ||