Introduction
With drone sales expected grow exponentially in the near future, and an increasing number and severity of drone incidents occurring daily, Ruicen launched Drone Gun to respond to
nefarious use of consumer and commercial drones and the resulting need for effective
countermeasures to drone intrusions.
Ruicen aims to help public and private sector customers, where allowed by law, take proactive measures against airborne threats to safety, security, and privacy.
Technique characteristics
1. Taking use of super-high frequency with high effective power.
2. Effective output power (channel power) and bigger interfere radius.
3. Only interfere downlink frequency of mobile system, without disturb normally working of Base Stations.
4. Imported elements: Slow start up design of circuit. These elements can maintain the stable operation condition with high integration.
Product Parameters
Portable light UAV Drone Jammer, Built-in high gain directional antenna, Built-in 4 sets of independently operated RF working unit, can choose to on/off GPS to drive the drone or force the drone to land, can be transmitted shielding interference signals to the surrounding 45-degree angle, Coverage (1000-1500m) can be comprehensive and stable uninterrupted shielding of the GPSL1, WIFI 2.4G, and 5.8G bands in the UAV frequency band.
Feature
1.High-gain 8dbi built-in antenna, Jamming range up to 1.5KM.
2.Working for more than 60 minutes with fully charged.
3.the customer can switch according to their requirements.
4.There is a power switch in the visible part of the body, including a power indicator, which can be operated directly by one hand. 5.Independent design of control switch, aiming at stopping peeping, driving away, and forcing to land.
Channel | Working Frequency | Output power(±1dBm) | |
CH1 | 2.4G | 2400-2485MHz | 43 dBm(20W) |
CH2 | 5.8G | 5725-5850MHz | 43 dBm(20W) |
CH3 | GPSL1, Glonass, BDS | 1575.4±2.5MHZ(1.5G-GPS) | 44.7 dBm(30W) |
CH4 | 2.4G | 2400-2485MHz | 43 dBm(20W) |
Power supply mode | Inside battery 1h: 28V, 5A; | ||
Turn on/off | 3 Independent Switch for each band | ||
Total Output power | 90W | ||
Battery working time | 60 minutes | ||
Working temperature | -20ºC to +55ºC | ||
Power consumption | 140W | ||
Weight | 4.3KG, Packing Weight:7KG | ||
Size | 660X290X50mm | ||
Directional Panel Antenna | 8dBi | ||
Notices
1. Be sure to connect all the antenna before the power supply is switch on. Please do not take off antenna when the machine is working.
2. Antenna shall be used vertical to the ground, working more efficiently.
3. Please don't put the jammer in the water and fire to avoid using in the bad
condition of over-wet, over-hot, high voltage and high magnetism.
4. If the jammer can not be charged or other unconventionality( the indicator light doesn't light up), please contact with the distributor in local place. Any refit and incorrect repair is not allowed.
5. Any ruin and disrepair caused by incorrect operation and disassembly will be excluded from the repair with free of charge.