Powerful 10W GSM900MHz Mobile Signal Repeater with IP63 Waterproof Design

Powerful 10W GSM900MHz Mobile Signal Repeater with IP63 Waterproof Design

IP63 Waterproof Signal Repeater Description:

The High Power 10W GSM900 Signal Repeaters are cost-effective solutions when mobile signal coverage are required in large areas, such as the supermarkets, factories, office buildings, parking lots, tunnels, and rural areas, etc..

The High Power 10W Repeater has a unique function, the Intelligent Mode. In general, the Intelligent Mode can automatically reduce interference continuously. These High-power models are equipped with comprehensive LCD front panels inside.

GSM 900MHz Wide Band Repeaters are cost effective and reliable solutions designed to extend and improve the coverage area of GSM communication systems. GW-40G RF Repeater is designed to solve problems of GSM mobile signal, which is much cheaper than adding a new base station (BTS). Main operation of the repeaters are to receive lower-power signal from BTS via RF transmission and then transmit the amplified signal to the areas where network coverage is inadequate.And the mobile signal is also amplified and transmitted to the BTS via the opposite directon.

The Single-Band RF Repeater is the kind of repeater used most frequently. It has a simple structure to transparently convey and amplify the wireless signal (at the same frequency) between the BTS (Base Transceiver Station) and mobiles in single wireless network.

The Single-Band RF Repeater is working as a relay between the BTS and mobiles.

It picks up the signal from the BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna (or the Indoor Signal Distribution System) to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.

As per operator’s requirement for working frequency, two types of Single-Band RFR are available:

1. Band-Selective Single-Band RF Repeater: to amplify all signals in the whole band (bandwidth is customized);

2. Channel-Selective Single-Band RF Repeater: to amplify only the signals transmitted in the customized 1/2/4/8/16 channels.

Powerful 10W Features:

· Aluminum-alloy casing has high resistance to dust, water and corroding;

· AGC (automatic gain control) function to prevent self-oscillation;

· Highly selective channel selector can process multiple channels simultaneously;

· No interference to BTS by adopting linear amplifier with high gain and low noise;

· Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink;

Mobile Signal Repeater Application:

To expand signal coverage or fill signal blind area where signal is weak or unavailable.

· Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, highways…

· Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots.

The Repeater is mainly applicable to such case:

· The repeater can find an installation place which can receive pure BTS signal at strong enough level and can meet the requirement of isolation to avoid self-oscillation;

In comparison with FSR (frequency shift repeater) and FOR (fiber optic repeater), the RFR has the following benefits and disadvantages:

Waterproof Signal Repeater Specification: